1 Shot High Temp Reducer ZZ6002 - Quart High Temp Reducer ZZ6002 - Quart Size  Alkyd-Resin (oil base) gloss enamels for interior or exterior use on metal, glass, wood, enamel receptive banners and vinyl, vehicle lettering, pinstriping and graphics. 1 Shot Lettering Enamels have outstanding hiding, durability and fade resistance.   Superior flow characteristics assure the virtual absence of brush marks and provide a clean, sharp edge.  1 Shot Lettering Enamel Paints have been used by Sign Professionals for decades. Temperature:   Best applied between 65 F and 85F. Will not dry below 50 F. Application Method:    Brush, Roller, Airbrush or Spray Thinning: 1 Shot 6000 Series Reducers Recommend.   Compatibility: 4001/4002 Tints., 4003 Clear, 4007 Hardener Clean-up:  Brushes:  4004 Brush Cleaner.  Equipment: Mineral spirits  Drying Times:  8 hours and cures in 6–8 weeks Depending on temperature  1 Shot Lettering Enamel Paints no longer contain lead. Some colors do contain toxic pigments. Although they are still not for use by children, the new 1-Shot formulas do not use lead as an opacifier.  If a surface is not thoroughly cleaned, it may contain waxes, oils or silicones that can cause “Fisheye”.  Make sure to clean with a good surface prep and degreaser.  1Shot Flattening Paste can be used in varying ratios to reduce gloss or create close to a dead flat finish.  Mixing 1 Shot with other types of paints concerns are that the oil-alkyd enamels are not fully compatible with latex or acrylic latex paints. There can be adhesion issues, the products will expand and contract at different rates and when faced with UV exposure, temperature changes and humidity the results can be checking, cracking and premature failure.  FOR USE BY PROFESSIONALS ONLY - NOT INTENDED FOR USE BY CHILDREN!  SHIPS VIA UPS GROUND ONLY